VW Transporter audio upgrade by Dav-Tec, Chesterfield

Audio Upgrades

& Bespoke hi-res DSP Systems

From plug-and-play speaker upgrades to fully bespoke, high-end hi-res immersive audio systems, Dav-Tec builds VW Transporter audio around what you want to hear and how you use your van.

Every system is engineered around correct product choice, clean fitting, factory-compatible integration and proper tuning — whether it is a straightforward daily-driver upgrade or a no-compromise bespoke build.

Dav-Tec was selected for Audiotec Fischer UK’s Focus 50 programme, an advanced dealer group centred on DSP knowledge and tuning standards. That continued technical development supports the way we integrate, measure and tune each system, so the result is not simply louder — it is cleaner, clearer, better controlled and more immersive.

Hertz Mille Pro MP 25 tweeter, fitted by Dav-Tec

Audio Upgrades

Start with a vehicle-specific plug-and-play speaker upgrade from Option Audio or Gladen, or move into a bespoke system using Morel, Focal or Audiotec Fischer speakers. For amplification and DSP we favour Audiotec Fischer HELIX and MATCH products, with Wavtech used where it best suits the integration and Hertz commonly used for entry-level subwoofer duties. Alpine and Pioneer are our preferred head-unit brands.

Audison Forza AF C8.14 bit DSP amplifier, fitted by Dav-Tec

Bespoke Hi-Res DSP Systems

Compare our Two-Way DSP & Bass, Three-Way DSP & Bass and Reference Bespoke builds. Each system is designed around the van, with front-door treatment, suitable bass, clean integration and measured tuning. Complete workshop builds are quoted individually, including VAT.

VW Transporter audio upgrade by Dav-Tec, Chesterfield

Audio Calibration

Proper calibration is what turns a collection of good components into one coherent system. Using acoustic measurement, specialist software and experienced listening, we set levels, time alignment, crossovers and equalisation to suit the vehicle and deliver a balanced, controlled result.

Dead Doors

Acoustic treatment helps control panel resonance, vibration and unwanted noise. We choose the materials and layers for each area of the van: vibration damping, sound absorption and thermal insulation serve different purposes.

For an audio upgrade, our Dead Doors front-door treatment gives the speakers a more stable environment for tighter, more controlled midbass. Wider treatment can improve comfort in a daily driver or camper, with the result depending on the areas treated, existing trim and conversion. We’ll recommend a suitable scope for your van rather than promise a fixed noise reduction.

VW Transporter audio upgrade by Dav-Tec, Chesterfield

Bespoke Transporter audio packages

Choose the system around your music, the cabin and the space you want to keep. These complete workshop builds bring the speakers, DSP amplification, discreet bass, acoustic treatment and calibration together.

Our main bespoke range covers VW Transporter T5, T5.1, T6 and T6.1, with the exact generation and factory audio checked first. New Ford-platform Transporter and Transit Custom projects need their own assessment.

Two-Way DSP & Bass

A balanced front stage for clear vocals, convincing staging and bass that supports the music.

  • Separate front tweeters and door mid-bass speakers.
  • Active DSP control of the four front drivers.
  • Rigid, sealed speaker mounting and both front doors treated.
  • A matched subwoofer, enclosure and suitable amplification.
  • Vehicle integration, secure wiring and measured tuning.

Speaker positions and the visible finish are agreed for your van.

Individually quoted, including VAT.

Discuss this system

Three-Way DSP & Bass

A dedicated midrange gives us more control over vocals and the front soundstage.

  • Tweeter, midrange and door mid-bass on each side.
  • Six independently controlled front-speaker channels.
  • Bespoke midrange and tweeter mounting where required.
  • Both front doors treated, plus a matched subwoofer and enclosure.
  • DSP amplification, integration and full measured calibration.

We agree the placement, sightlines and trim finish before fabrication.

Individually quoted, including VAT.

Discuss this system

Reference Bespoke

A sound-quality project developed around the vehicle and your listening priorities.

  • Front-stage drivers and locations selected together.
  • Custom mounting, trim and enclosures where justified.
  • Amplification and DSP planned for every driver.
  • Bass and acoustic treatment matched to the cabin and available space.
  • Detailed measurement, calibration and listening checks.

The design sets the specification; extra speakers or subwoofers are added only when they serve it.

Individually quoted, including VAT.

Explore BRAX MATRIX Reference

Discuss this system

What the complete installation covers

Each quote itemises the speakers, DSP and amplifiers, integration harnesses or interfaces, speaker adapters and sealing, subwoofer and enclosure, protected power wiring, mounting, consumables, installation and measured tuning. Fabrication and trim work are included wherever the agreed design requires them.

Both front doors form the treatment foundation. We use Comfort Mat Pulsar on suitable door areas, with Vespa and Dodo Acoustic Liner selected for the panel, moisture conditions and available clearance. Drainage, moving parts and service access are preserved.

Rear speakers, wider cab treatment, floor, roof, tailgate and conversion alterations are assessed and itemised separately when needed. A front-focused system does not automatically need rear speakers.

Bass that works with the van

Under-seat installation depends on the seat base, swivel, heater, leisure electrics and the volume needed by the chosen subwoofer. Where that space is unsuitable, we plan another discreet location, such as a wheel-arch enclosure. Fixing, clearance and usable storage are checked before the design is agreed.

Factory audio and calibration

Standard audio, Dynaudio and aftermarket head units need different integration checks. We establish the actual source, amplifier, wiring and functions to retain before choosing the parts. Morel, Focal, HELIX, MATCH and other Dav-Tec-approved equipment are selected to suit the design and current availability.

We assess the incoming signal, configure and protect the drivers, then measure their response and integration before the final listening checks. Learn about measured audio calibration.

Midrange and tweeter in a finished Dav-Tec Transporter A-pillar build
DAV-TEC maker's markDAV-TEC made
Genuine Dav-Tec A-pillar work, illustrating a bespoke finish. This photograph does not show the proposed BRAX MATRIX Reference system. The speakers, layout and trim for your build are agreed individually.

Explore our A-pillar builds

BRAX MATRIX Reference Transporter system

Our higher-level three-way Transporter specification brings BRAX MATRIX PRO speakers, HELIX amplification and discreet Wāvtech bass together as a complete bespoke installation.

Designed for listeners who want natural voices, space around instruments, a convincing front soundstage and bass that joins the music cleanly. This is a proposed specification for new workshop builds, with the layout and finish agreed for your van.

The core system

  • BRAX MATRIX PRO three-way front stage: a pair each of ML28 PRO tweeters, ML80 PRO midranges and ML165 PRO door mid-bass speakers.
  • HELIX P SIX DSP ULTIMATE: independent amplification and DSP control for all six front drivers.
  • Audiotec Fischer CONDUCTOR PRO: a neatly mounted SCP controller, configured for the agreed system controls.
  • Wāvtech thinPRO10-2: one 10-inch, 2-ohm shallow subwoofer in a bespoke sealed under-seat enclosure, subject to the seat-base assessment.
  • HELIX M ONE X: a dedicated subwoofer amplifier fed by the P SIX’s processed outputs.

The installation is part of the package

  • Premium Dead Doors for both front doors: suitable acoustic layers, panel treatment and trim decoupling, with drainage and service access preserved.
  • Custom speaker mounts: rigid, sealed door-speaker interfaces and individually planned midrange and tweeter mounting, with fabrication and finish included in the agreed scope.
  • Bespoke amplifier rack: secure equipment mounting, suitable ventilation, protected power distribution and serviceable cable routing.
  • Complete integration: source assessment, the correct vehicle connections, new speaker wiring and secure enclosure fixing.
  • Measured tuning and handover: driver protection, alignment, acoustic crossover integration, tonal calibration and checks of the agreed retained functions.

Optional rear speaker package — additional cost

Add a HELIX NEXT V TWO amplifier, a pair of HELIX COMPOSE 165 mm coaxial speakers and Dav-Tec rear speaker pods, with wiring, mounting, grilles and calibration included in the separate rear-option quote. The coaxial model is selected against the available pod clearance.

The rear speakers receive their own processed signal and are tuned to support the front stage. The Contour 165 rear speaker pods linked here suit a standard factory roof lining on T5, T5.1, T6 and T6.1 vans. Halo-roof installations with these pods need adaptation; these Contour pods are not compatible with pop-top conversions. If your van has a pop-top or Halo roof, discuss a suitable rear-speaker pod and speaker package with us before booking so we can confirm the mounting and speaker clearance.

Specified for your Transporter

We assess T5, T5.1, T6 and T6.1 projects individually. The factory source and any amplifier, door clearances, speaker positions, seat bases, swivels, batteries, conversion equipment and rack location are checked before the build is confirmed. New Ford-platform Transporter and Transit Custom projects need their own design.

The under-seat enclosure is designed for the thinPRO10’s required air volume and operating clearance. The seat layout, rack position and visible trim changes are agreed before booking.

Complete installation quoted individually, including VAT. The base quote covers the front stage, bass, Premium Dead Doors, custom mounting, amplifier rack, wiring and measured tuning. Rear speakers are an optional additional cost. Parts availability and the final fabrication scope are confirmed with the quote.

Discuss a BRAX MATRIX Reference build

Plan your bespoke Transporter system

Tell us your Transporter model and year, factory audio, roof and conversion layout, the improvements you want and your budget for the complete fitted system. Include any seat-base, storage or appearance constraints.

Choose a route or enter “unsure”. We confirm the specification, parts availability, fabrication and workshop time before giving a complete price including VAT and agreeing a fitting date.

For a vehicle-specific packaged upgrade, browse Audio Packages. For a selected VW, Audi, SEAT, CUPRA or Škoda car, use our VAG bespoke audio service.

4 + 12 =

Reel of black Stinger 18-gauge speaker cable

Clean Install & Proper Wiring

A good audio upgrade is only as good as the way it is installed. We use suitable cabling, proper routing, secure connections and clean integration so the finished system is reliable, serviceable and built to last.

The aim is simple: no messy wiring, no shortcuts, and no install work that lets the rest of the system down.

Better Sound With A Factory-Style Setup

You don’t always need a wild-looking aftermarket setup to get a serious audio improvement. Many Transporter owners want better sound while keeping the cabin clean, usable and factory-style.

We can build systems around factory-style head units, Apple CarPlay and Android Auto upgrades, DSP amplifiers, speaker upgrades, subwoofers and Dead Doors, depending on what you want from the van.

Not sure whether you need door treatment or a wider package? Read our VW Transporter sound-deadening guide.

Whether you want a simple improvement over standard or a properly tuned sound-quality system, we’ll guide you towards the right setup rather than throwing random parts at it.

Selected Bespoke VAG Audio Builds

VW Transporter audio remains our core focus, but we also take on selected bespoke audio builds for suitable VW, Audi, CUPRA, SEAT and Škoda vehicles.

These are not basic speaker-swap jobs. The project needs to justify a properly engineered two-way or three-way system, with DSP amplification, acoustic treatment, subwoofer integration where appropriate, clean OEM+ installation and full calibration.

Contact Us Today!

Home Contact Us

Customer Reviews

We take pride in clean, properly integrated Transporter upgrades. See what customers say about Dav-Tec’s work, service and attention to detail.